| To return to faceplates
CLICK HERE Installation is easy.
1 - Simply remove all the screws on the back of the phone (6 of them, 2 at
the top and 4 in battery compartment) with a T6 screwdriver.
2 - Remove the entire circuit board from the faceplate by lifting it off.
3 - Transfer the speaker and microphone and the 3 rubber switches from the
old faceplate to the new one.
4 - Attach the entire circuit board and the back part of the phone to the
new faceplate.
5 - Replace all the screws using a T6 screwdriver.
6 - Check function by placing a call to determine if you can hear and the
other person can hear you. This is important. If you do not have the screws
tight enough you may not be able to hear or you may not hear the other
person.
If you have had a Nokia phone before and removed screws please be aware that
the screws for the Motorola V120 are more difficult to remove and replace.
They take more effort. Be sure to apply correct pressure when unscrewing and
replacing screws so not to strip out the screws or the T6 screwdriver.
To return to faceplates
CLICK HERE |
