Note: you will need a T6 screwdriver for installation.  Installation instruction are available here - remember we provide these instructions as a courtesy.  We are not responsible for any damage you cause your phone.  Professional installation is highly recommended

To return to faceplates Click Here

Item: T6 $3.50
 

Using credit card, library card, or strong nails GENTLY peel up the screen cover as shown in arrows and set aside.  You will find the screws underneath. It is held by double sided sticky tape only!  Be careful as 1-you do NOT want to scratch your phone and 2- you WILL want to re-attach this tab.  Once removed you will find the screws underneath

Remove the screws using T6 screwdriver and set aside.  I recommend working over a towel, bed sheet, light colored surface. Do NOT work anywhere near shag carpet, sink, drain, etc.  You lose these screws and you are out of luck.

Once the screws are removed and placed somewhere SAFE - turn your phone over.  GENTLY pry off your cover beginning at the hinge where you just removed the screws and then working your way down the phone along the sides. Use the credit card/library card and work from the sides forward SLOWLY and GENTLY.  You will find small latches inside that give easily.  Pay attention to how it comes off as you will be re-attaching the new faceplate in the same manner.

Reassemble in reverse of the above.  DO NOT OVER TIGHTEN YOUR SCREWS!

Make sure you smooth down the screen cover.
To return to 6101 6102 6102i 6103 faceplates click here